As a widely used adhesive material in industrial production, the storage safety of polyester hot melt is crucial. Correct storage conditions and safety equipment can ensure the quality and performance of the hot melt while protecting the safety of operators. The following are some key safety equipment and measures required when storing polyester hot melt:
1. Storage environment control
Temperature control
Polyester hot melt is very sensitive to temperature, and too high a temperature can cause it to deteriorate and fail. Therefore, the temperature of the storage environment should be controlled at 0-28℃. This requires the installation of temperature monitoring equipment such as thermometers and hygrometers, as well as possible temperature control equipment such as air conditioning or refrigeration systems.
Humidity control
Humidity also affects the quality of hot melts, and they should be sealed and stored in a dry warehouse to avoid contact with moisture and humidity. Therefore, dehumidifiers or desiccants are necessary safety equipment to keep the storage environment dry.
2. Fire and explosion prevention measures
Since hot melt adhesive is a flammable substance, attention should be paid to fire and explosion prevention during storage and transportation. This includes:
Fire extinguishers: The warehouse should be equipped with professional fire prevention equipment, such as fire extinguishers, so that the fire source can be quickly extinguished at the early stage of the fire.
Fire shutter doors: Fire shutter doors are installed at the entrances and exits of the warehouse to prevent fire isolation.
Fire source control: Ensure that the warehouse is away from fire sources and high-temperature areas, and smoking and open flame operations are prohibited.
3. Personal protective equipment
Operators should wear appropriate protective equipment when handling hot melt wires to prevent burns or chemical contact:
Safety gloves: Wear safety gloves to avoid direct contact between hands and high-temperature liquid hot melt adhesive or component surfaces
Goggles: Use goggles to protect eyes and prevent hot melt materials from splashing and causing injuries
Long-sleeved work clothes: Wear long-sleeved work clothes to protect arms and body from burns.
4. Ventilation system
During the process of melting glue and using it, ensure good ventilation to reduce the inhalation of harmful gases. This may require the installation of exhaust fans or ventilation systems to maintain air circulation.
5. Cleaning and maintenance equipment
Cleaning tools: Clean equipment and tools in time after use to avoid difficulties in removing the colloid after solidification. This may require specific cleaning agents and tools.
Equipment maintenance: Regularly maintain hot melt adhesive equipment to prevent colloid blockage and aging
6. Emergency treatment equipment
First aid kit: Prepare a first aid kit for initial treatment when the operator is injured.
Eye wash station: If hot melt adhesive accidentally splashes into the eyes, rinse immediately with plenty of clean water and seek medical help
7. Environmental monitoring equipment
Thermometer and hygrometer: Monitor the temperature and humidity of the storage environment to ensure that it is within the appropriate range.
Gas detector: Detect whether there is harmful gas accumulation in the storage environment.
8. Signs and warnings
Safety signs: Set up obvious safety signs in the storage area to remind operators to pay attention to safety.
Warning label: Put a warning label on the packaging of hot melt to remind operators of the dangers of hot melt.
Through the implementation of the above safety equipment and measures, the storage safety of polyester hot melt can be effectively guaranteed, while also protecting the health and safety of operators. Proper storage and handling of hot melt is the key to ensuring smooth industrial production.
Post time: Dec-13-2024